Study of Voltage Stability Using Intelligent Techniques

The continuous increase in the demand of active and reactive power in the power system network has limits as scope for network expansion many a times poses serious problems. The power system must be able to maintain acceptable voltage at all nodes in the system at a normal operating condition as well as post disturbance periods. Voltage instability is a serious issue in the system due to progressive and uncontrollable fall in voltage level. The research presented in this thesis is concerned with several facets of the voltage stability problem. The focus of this thesis is to improve the voltage stability of the system. The sensitivity analysis plays an important role as it monitors the nearness of the system towards the voltage collapse situation. The conventional offline data as well as the online data are processed to determine the weak areas are determined. As the system is having nonlinearities it is governed by differential and algebraic equations which are in turn solved by nonlinear techniques. In this work the system is analysed with steady state model. Once the system is represented in the form of differential equations and standard form is achieved advanced control techniques can be easily applied for its solution. The main focus of this thesis is aimed at placing FACTS device known as the Static compensator (STATCOM) at weak location of the system network to address the problem of voltage instability. With its unique capability to control reactive power flow in a transmission line as well as voltage at the bus where it is connected, this device significantly contribute to improve the power system. These features turn out to be even more prominent because STATCOM can allow loading of the transmission lines close to their thermal limits, forcing the power to flow through the desired paths. This opens up new avenues for the much needed flexibility in order to satisfy the demands. The voltage instability is improved with reactive power supports of optimal values at optimal locations. Also renewable energy sources offer better option than the conventional types and hence attempt has been made to include the wind energy for this study the wind generator is considered delivering constant output and is assumed as a substitute to the conventional power generators. Finally the system voltage stability is studied with design of a controller based on probabilistic neural network. The developed controller has provided much better performance under wide variations in the system loads and contingencies and shown a significant improvement in the static performance of the system. The proposed controller is tested under different scenarios of line outages and the load increase and found to be more effective than the existing ones. The research has revealed a veritable cornucopia of research opportunities, some of which are discussed in the thesis

Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics

A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN

ATLAS pixel detector electronics and sensors

The silicon pixel tracking system for the ATLAS experiment at the Large Hadron Collider is described and the performance requirements are summarized. Detailed descriptions of the pixel detector electronics and the silicon sensors are given. The design, fabrication, assembly and performance of the pixel detector modules are presented. Data obtained from test beams as well as studies using cosmic rays are also discussed

Studies of new Higgs boson interactions through nonresonant HH production in the b¯bγγ fnal state in pp collisions at √s = 13 TeV with the ATLAS detector

A search for nonresonant Higgs boson pair production in the b ¯bγγ fnal state is performed using 140 fb−1 of proton-proton collisions at a centre-of-mass energy of 13 TeV recorded by the ATLAS detector at the CERN Large Hadron Collider. This analysis supersedes and expands upon the previous nonresonant ATLAS results in this fnal state based on the same data sample. The analysis strategy is optimised to probe anomalous values not only of the Higgs (H) boson self-coupling modifer κλ but also of the quartic HHV V (V = W, Z) coupling modifer κ2V . No signifcant excess above the expected background from Standard Model processes is observed. An observed upper limit µHH < 4.0 is set at 95% confdence level on the Higgs boson pair production cross-section normalised to its Standard Model prediction. The 95% confdence intervals for the coupling modifers are −1.4 < κλ < 6.9 and −0.5 < κ2V < 2.7, assuming all other Higgs boson couplings except the one under study are fxed to the Standard Model predictions. The results are interpreted in the Standard Model efective feld theory and Higgs efective feld theory frameworks in terms of constraints on the couplings of anomalous Higgs boson (self-)interactions

Model-independent search for the presence of new physics in events including H → γγ with s \sqrt{s} = 13 TeV pp data recorded by the ATLAS detector at the LHC

Abstract A model-independent search for new physics leading to final states containing a Higgs boson, with a mass of 125.09 GeV, decaying to a pair of photons is performed with 139 fb−1 of s $$\sqrt{s}$$ = 13 TeV pp collision data recorded by the ATLAS detector at the Large Hadron Collider at CERN. This search examines 22 final states categorized by the objects that are produced in association with the Higgs boson. These objects include isolated electrons or muons, hadronically decaying τ-leptons, additional photons, missing transverse momentum, and hadronic jets, as well as jets that are tagged as containing a b-hadron. No significant excesses above Standard Model expectations are observed and limits on the production cross section at 95% confidence level are set. Detector efficiencies are reported for all 22 signal regions, which can be used to convert detector-level cross-section limits reported in this paper to particle-level cross-section constraints

Searches for lepton-flavour-violating decays of the Higgs boson into eτ and μτ in \sqrt{s} = 13 TeV pp collisions with the ATLAS detector

Abstract This paper presents direct searches for lepton flavour violation in Higgs boson decays, H → eτ and H → μτ, performed using data collected with the ATLAS detector at the LHC. The searches are based on a data sample of proton-proton collisions at a centre-of-mass energy s $$\sqrt{s}$$ = 13 TeV, corresponding to an integrated luminosity of 138 fb−1. Leptonic (τ → ℓνℓντ) and hadronic (τ → hadrons ντ) decays of the τ-lepton are considered. Two background estimation techniques are employed: the MC-template method, based on data-corrected simulation samples, and the Symmetry method, based on exploiting the symmetry between electrons and muons in the Standard Model backgrounds. No significant excess of events is observed and the results are interpreted as upper limits on lepton-flavour-violating branching ratios of the Higgs boson. The observed (expected) upper limits set on the branching ratios at 95% confidence level, B $$\mathcal{B}$$ (H → eτ) < 0.20% (0.12%) and B $$\mathcal{B}$$ (H → μτ ) < 0.18% (0.09%), are obtained with the MC-template method from a simultaneous measurement of potential H → eτ and H → μτ signals. The best-fit branching ratio difference, B $$\mathcal{B}$$ (H → μτ) → B $$\mathcal{B}$$ (H → eτ), measured with the Symmetry method in the channel where the τ-lepton decays to leptons, is (0.25 ± 0.10)%, compatible with a value of zero within 2.5σ